Detailed graphs
By default, when you click Detailed graphs, it displays a full data set (meaning a full night of sleep).
Along the top you'll find identity details for the patient. Below the identity information, you will see:
date of the tracings
number of therapy hours (rounded to the nearest value).
The traces section will look different for each patient, as this is defined by the therapy modes on their PAP device. The various traces that can be displayed include:
Pressure (cm H2O or hPa) which can include Mean, Inspiratory, Expiratory (cm H2O or hPa which can be set in Options).
Flow (L/min or L/sec which can be set in Options).
AutoSet Pressure (cm H2O or hPa).
Leak (L/min or L/sec).
Apnoea or Hypopnoea events—can include classification of different apnoea events: obstructive, central, and unknown.
AHI and AI (Events/hr).
Flattening/Flow limitation (flat to round).
Snore (quiet to loud).
Minute ventilation (L/min) and Target ventilation.
Respiratory rate (breaths/min).
Tidal volume (mL).
I:E Ratio.
Inspiratory time (sec).